Loading... Please wait...

Our Newsletter

BMPH Series Motor BMPH-100-H2-S-P

  • Image 1
  • Image 2

Product Description

BMPH Series motor, SAE -“A” 2 BOLT mounting flange, SAE 6B Spline drive shaft, 1/2 NPTF Port.  Replaces Char-Lynn 101-1075 or Danfoss 151-2093.

The BMPH ROTORTORC™ gear set, shaft distribution flow, hydraulic motors is a compact, highly efficient, low speed-high torque design which can be used in either parallel or series systems.

These low weight advanced construction design motors are manufactured in accordance with the requirements of the ISO 9000-2000 quality system.



                        5.90 in3/rev

Max Speed

            Continuous  590 RPM

            Intermittent 675 RPM

Max Torque

            Continuous  1425 in.lbs

            Intermittent  1885 in.lbs

Max Differential

            Continuous  1840 PSI

            Intermittent 2425 PSI

Max Flow

            Continuous 15.80 gpm

            Intermittent 19.75 gpm


                        13.00 lbs


Continuous = maximum of continuous operation

Intermittent = maximum operating range for 6 seconds per minute



            L   5.79"

            L1 0.51"

For optimal utilization of these motors the following is recommended:

    * Normal oil operating temperature should be 70° to 150° F.
    * Maximum operating temperature should not exceed 190° F.
    * Filtration level per ISO Cleanliness Code level 18/3.
    * Minimum oil viscosity should be 100 SUS.
    * Motors should be operated at less than 30% of rated performance for the first hour of operation.
    * Simultaneous maximum torque and maximum speed is not recommended.

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the BMPH Series Motor BMPH-100-H2-S-P to your wish list.

You Recently Viewed...