Loading... Please wait...

Our Newsletter

BMPH Series Motor

  • Image 1
  • Image 2
  • Image 3

Product Description

BMPH Series motor, SAE - "A" 2 Bolt mounting flange, SAE 6B Spline drive shaft, Manifold Port.  Replaces Char Lynn 101-1095 or Danfoss 151-2178.

The BMPH ROTORTORC gear set, shaft distribution flow, hydraulic motor is a compact, highly efficient, low speed-high torque design which can be used in either parallel or series systems.

These low weight advanced construction design motors are manufactured in accordance with the requirements of the ISO 9000-2000 quality system.

            19 in3/rev

Max Speed
    Continuous    190 RPM
    Intermittent    235 RPM

Max Torque
    Continuous    3575 in.lbs

    Intermittent    4470 in.lbs

Max Differential
    Continuous    1625 PSI

    Intermittent    2060 PSI

Max Flow
    Continuous    15.80 gpm

    Intermittent    19.75 gpm

            15.20 lbs

Continuous = maximum of continuous operation

Intermittent = maximum operating range for 6 seconds per minute

    L  7.72"

    L1 1.65"

For optimal performance, the following is recommended:

    * Normal oil operating temperature should be 70° to 150°F.
    * Maximum operating temperature should not exceed 190°F.
    * Filtration level per ISO Cleanliness Code level 18/3.
    * Minimum oil viscosity should be 100 SUS
    * Motors should be operated at less than 30% of rated performance for the first hour of operation.
    * Simultaneous maximum torque and maximum speed is not recommended.

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the BMPH Series Motor to your wish list.

You Recently Viewed...